Installation Instructions
- 1. (Starting w/ the topmost image directly left) Choose the locations of the mirror clips. Mark points 3/16" past the actual edge of the mirror for each clip. The number of clips used will vary according to the size and weight of the mirror. For heavy mirrors, use 3 or more clips on the bottom edge.
- 2. Install self-drilling drywall anchor with a #2 Phillips head screw driver. Unless the mirror is being mounted to wall studs, push the anchor into the wall board until the anchor's thread reaches the wall. Using gentle, forward pressure, screw in the anchor until it is flush with the wall. For installation on cement or other types of walls, use the proper fastner instead of the provided #6 anchor.
- 3. Stack the fittings on the provided #3 screw as shown. Use the provided plastic mirror spacers (A, B, or C) depending on the mirror's thickness.
- 4. Screw the #3 screw into the #6 anchor until tight.
- 5. With the mounting hardware installed, hold the mirror in place and put your mirror image clip (#2 in the diagram above) on the #3 screw. Hold the mirror image clip in the desired final position, and then tighten the mirror image's allen set screw with the provided allen key (#1).
5585 Harris Hill Road
Williamsville, NY 14221
Business Hours (EST):
Monday - Friday
8:00AM - 5:00PM
Saturday
8:30AM - 12:00PM
Closed Sunday
Phone:
(716) 741-9030
Fax:
(716) 741-4621
Buy Direct From Us At:
1-800-485-7289
